Package Deal: (1) DT-50 + (1) MB-240X (Balancer Mounts to Changer Tower)
Take advantage of Dannmar’s value packaged deals. This Dannmar tire changer and wheel balancer package consists of a DT-50 tire changer with a swing arm and a DB-70 wheel balancer. The DT-70 tire changer controls are mounted upfront and logically arranged for both speed and ease-of-use. The tire changer is designed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging allow wheels.
The Dannmar DB-70 wheel balancer works on wheels up to a 28″ diameter. It is very accurate and a dependable no-frills balancer that features proprietary Digital Sensor Technology for critical reliability and repeatability. Dannmar’s wheel balancer automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that show the correct amount and location of weights in just six seconds. And best of all this special package provides more for less.
Features
DT-50 Features
- Alloy steel mount and demount head w/protective plastic covers
- Traveling drop-center, top-mount helper/swing-in bottom helper disc
- High Torque Electric Turntable
- Adjustable Internal Rim Clamping – Capacity – 12” – 26” (305 mm – 660 mm)
- Maintenance-free gearbox
- Aluminum pneumatic cylinders
- High-pressure polyurethane pneumatic tubing
- Enhanced bead Breaker Blade
- Turbo-Blast Bead Seater
- Inflation Gauge with Integrated Air Dump Valve
- Tool Tray/Storage
- Soap Bucket
- Enhanced Bead Breaker Blade
- Oiler/Lubricator
- Optional motorcycle clamps
- Air Regulator
- Inflation restraint
- Forged steel foot pedals
MB-240X Features
- Basic dynamic wheel balancing function
- Balance an entire set of wheels
- Check the dynamic balance of suspected out-of-balance wheels
- Low-cost of ownership
- Computerized electronic data display for each balance
- Easy to use
- Good companion equipment to a Dannmar Tire Changer
- Quiet operation
- Perfect for small garages, car-hobby garages, or a backup
- Works well on many trailer wheels too
Specs
DT-50 Specifications
| MOTOR | 110-VAC, 50-60 Hz, 1-Ph |
|---|---|
| DRIVE SYSTEM TYPE | Electric / Air |
| TOWER DESIGN | Rigid Fixed / Swing Arm |
| POWER ASSIST TOWER | Not Equipped |
| BEAD SEATING SYSTEM | Turbo Blast / Bead Seating |
| AIR REQUIREMENT | 110-175 PSI (8-10 BAR) |
| WHEEL CLAMPING METHOD | 4 Clamps – Internal / External |
| TABLE CLAMPING SYSTEM | Dual Pneumatic Cylinders |
| BEAD BREAKING SYSTEM | Pneumatic Blade |
| TOWER DESIGN | Fixed |
| INTERNAL RIM CLAMPING CAPACITY | 14” – 26” (356 mm – 660 mm) |
| EXTERNAL RIM CLAMPING CAPACITY | 12” – 24” (305 mm – 610 mm) |
| TURNTABLE RIM WIDTH CAPACITY | 3” – 15” (76 mm – 381 mm) |
| BEAD BREAKER RIM WIDTH CAPACITY | 3” – 14” (76 mm – 356 mm) |
| MAXIMUM TIRE DIAMETER | 49” (1,245 mm) |
| NOISE | <70 dB |
MB-240X Specifications
| POWER | 110 VAC, 50-60 Hz, 1-Ph |
|---|---|
| CYCLE TIME | 7 seconds |
| BALANCING MODES | Multiple ALU Modes |
| DRIVE SYSTEM | Ball Bearing / Manual |
| WHEEL BRAKING | Hand Brake / Manual |
| CONES INCLUDED | Standard Cone Set |
| MAX. TIRE DIAMETER | 31.5” (800 mm) |
| MAX. TIRE WEIGHT | 150 lbs. (68 kg) |
| WHEEL DIAMETER CAPACITY | 12” – 24” (305 mm – 610 mm) |
| WHEEL WIDTH CAPACITY | 4” – 15” (102 mm – 381 mm) |
| BALANCING INCREMENTS | 0.25 or 0.01 ounce |
| BALANCING SPEED | 140 RPM |
| ACCURACY | +- 1 Gram (.035 oz) |
Reviews
There are no reviews yet.